The range of Controllers from CDA Electronics

#201

INERTIA HAND HELD THROTTLE


    A powerful hand held Throttle for the discerning modeller who seeks realistic train control. Featuring fully transistorised control for slow speed running. Inertia allows a gradual build up of speed and realistic coasting thus simulating the heavy momentum of the prototype. The inertia can be switched off for shunting operations in which case the throttle becomes a conventional controller with the addition of a brake.

    Linear Throttle Control gives infinite response from full stop to full on and offers the feeling of prototypical operation as well as visual authenticity of train movement. Linear Brake control gives complete range of brake force from a slight retardation to full emergency stop regardless of throttle setting. The brake is operative on both Inertia and normal running.

#202

INERTIA HAND HELD THROTTLE


    The same as CDA #201. Has 2 metre cable attached fitted with five pin Din plug and socket.

#203

INERTIA PANEL MOUNT THROTTLE


    The same as CDA #201. Suitable for surface mounting on the layout control panel.

#211

2 AMP PANEL MOUNT THROTTLE


    The preferred panel mount for those who want the maximum power and control of their trains. #211 is fully transistorised with smooth progressive control and can be added to any CDA Power Pack. The unit has a 2 amp output and a built in rectifier to avoid overloading your existing DC outlet. It can be connected to either 17 volt AC or 12 volt DC and is fitted with self resetting thermal overload cut-out.

#213

2 AMP HANDHELD THROTTLE


    Same as #211 but in a convenient hand size box to allow for walkaround control.

#215

2 AMP HANDHELD THROTTLE


    Same as #211 but in a convenient hand size box to allow for walkaround control, and fitted with a 2 metre cable and a 5 Pin Din plug and socket for easy fitting and mounting to layout.

#220

AUXILIARY POWER PACK 4 AMP.


    The CDA #220 Auxiliary Power Pack is a transformer rectifier unit operating direct from Mains Power input. It is a safe a foolproof model incorporating an automatic self resetting thermal overload cut-out. Ideal for large layouts the 4 amp output makes this model a powerful source where uncontrolled 17v AC and 12v DC is required.

#222

THROTTLE POWER PACK


    Used by beginners and professionals alike, the CDA #222 Throttle Power Pack is designed for single Train operation with sufficient power to double-head locomotives and operate accessories. It incorporates facilities for expansion and up to four trains can be operated with the use of extra circuit controllers. The combined power unit/controller is suitable for all 12v DC motors up to 1.5 amp.

    The long linear slide control provides unbelievably smooth and even running for all Gauges and transmits the feel of authentic train operation.

    The advanced solid state design and the special progressive power of this unit keeps your trains running steadily at all speeds.

    Durable metal case of modern design with up-to-date instrument finish. Fully protected by automatic self resetting thermal overload cut-out.

Input 240V AC.. 125amps., total Output 30 V/A

Outlets 12v DC Uncontrolled max. 2.0 amps.

17v AC Uncontrolled max. 1.6 amps.

0-12v DC Controlled max. 1.5 amps.

#223

DUAL CONTROL THROTTLE POWER PACK


    The ultimate in transistorised control, the CDA #223 Dual Control Power Pack incorporates Two independent train controls together with facilities for accessories and further expansion.

    Linear SLide Controls provide extremely smooth and even control and the real feel of prototypical operation. The automatic progressive power of this unit keeps your motor turning steadily at the slowest possible crawl as well as at speed.

    If you wish to operate two trains at the same time and perhaps more at a later date, then this unit is built to save you money. The #223 offers you two independent 12v DC Power Control Circuits each with a max of 2.5amps., as well as an accessory outlet to operate points, signals, lights, or further Circuit Control Units such as CDA #201, #202, #211 or #213.

    Built in a strong metal case for durability and strength. Automatic self resetting thermal overload cut-out.

Input 240V AC.. 125amps., total Output 30 V/A

Outlets 12v DC Uncontrolled max. 1.5 amps.

17v AC Uncontrolled max. 1.5 amps.

12v DC Controlled max. 1.5 amps.

#224

INERTIA THROTTLE POWER PACK


    The #224 Inertia Power Pack has all the sophistication and technical features the modeller could possibly require in a train controller. Designed to be either an integral part of the CDA System of model rail road control, or a valuable addition to your existing units. Prototype operation is now a reality and no other model on the Australian market has so much to offer.

(No Image Available)

    Built in heavy duty transformer, fully transistorised progressive power pioneered by CDA Electronics

    Inertia allows a gradual build up of speed and realistic coasting this simulating the heavy momentum of the prototype. The inertia can be switched off for shunting operations in which case the throttle becomes a conventional Controller with the addition of the brake.

    Linear Throttle control gives infinite response from full Stop to full On and offers that feeling of prototypical operation as well as visual authenticity of train movement. Progressive power is automatic, eliminating the rough transition of a pulse switch and the overheating of motors when operated on half wave for extended periods.

    Linear Brake control gives a complete range of brake force from a slight retardation to full emergency stop regardless of throttle setting. The brake is operative on both inertia and normal running, a unique feature of CDA.

    Forward-Reverse switch supplied with a center off position. Automatic self resetting thermal overload cut-out.

    Sturdy metal case for durability and strength.

Power Input 240V AC., Total Output 27.5 V/A

Outlet 12v DC Uncontrolled max. 2 amps.

17v AC Uncontrolled max. 1.6 amps.

12v DC Controlled max. 2 amps

#226

G SCALE THROTTLE POWER PACK


    Throttle power pack designed for the higher voltage requirements of LGB locomotives. Specifications are the same as CDA #222 but with a variable output of 0 - 18 v DC.

(No Image Available)

#240

INERTIA SOUND THROTTLE


    #240 is a fully functional inertia controller with the added feature of sound.

    A powerful Throttle for the discerning modeller and novice who seeks realistic train control. Featuring fully transistorised control for slow speed running, inertia allows a gradual build up of speed and realistic coasting thus simulating the heavy momentum of the prototype. The inertia can be switched off for shunting operations in which case the throttle becomes a conventional controller.

(No Image Available)

    Linear Throttle control gives infinite response from full Stop to full On and offers that feeling of prototypical operation as well as visual authenticity of train movement. Linear Brake control gives a complete range of brake force from slight retardation to full emergency stop regardless of throttle setting.

    In addition to the above control features, the unit is a fully featured sound controller. Both steam and diesel fans are catered for with an under the layout speaker thus giving high quality sound.

    All sound modes are directly linked to the throttle thus giving full synchronized sound. In addition to the synchronized sound the rev/cylinder rates can be controlled. This featured allows for the additional control to give such effects as wheel slip or hard high revving diesel sound. Depending on the set mode both steam whistle and diesel air horn are also available.

    Other features include Full volume control, 2 amp output and quality speaker.

    The unit is simple to wire only requiring two 15-18 volt AC input and two DC wires to the track.

© COPYRIGHT CDA ELECTRONICS 2011